Tender For auction sale of electrical and electronic items - lot 4a,electrical and electronic items - lot 4b,electrical and electronic items - lot 4c,electrical and electronic items - lot 4d,cell phone and accessories - lot 5,machinery and spare parts - lot 6a,machinery and spare parts - lot 6b,machinery and spare parts - lot 6c,machinery and spare parts - lot 6d,machinery and spare parts - lot 6e,machinery and spare parts - lot 6f,medical equipment - lot 7a,medical equipment - lot 7b,miscellaneous - lot 10
Tender For supplies of medicines medical equipments, spectacles and allied items - supplies of medicines medical equipments, spectacles and allied items, supplies of medicines medical equipments, spectacles and allied items, brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete, plastering in c.m 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete
Tender For surgical items part 1 - 3 way connector, 1 no., 4, ab. surg. suture. catgut chromic 2 (2216) (12 no. pack), 1 pkt, 8, ab. surg. suture. catgut plain 2-0 (2213) (12 no. pack), 1 no., 12, absorbent gauze (20mt x 90cm) (with isi mark) packaging unit: size: 20 mtrx90 cms (wt. 540gms plus or minus 90gms) than packed in poly bag with label (as per schedule:f), 1 bamboo, 16, airway (pediatric), 1 no., 20, airway no: 3, 1 no., 24, ambus bag (resuscitation kit) 1200 ml, 1 no., 28, ambubag with 700ml mask, 1 pkt., 32, b.p. cuff with rubber tube set (diamond) for b.p. instrument, 1 no., 36, bandage cloth (20mt x 90cm) with isi mark packaging unit: size: 20mtrx 90cms (wt. 1026 gms plus or minus 90gms) than packed in poly bag with label (as per schedule:f), 1 no., 40, biomedicalwaste bag blue size: 30 inch (w) x 60 inch (l) non chlorinated ldpe + lldpe plastic bag for bio-medicalwaste collection 1.made from 100percent virgin ldpe non chlorinated2.ordour free/pin hole free/dot free/uniforme in color3.packed in 1,5,10, or 25k gms with covers and label 4.for single use only5.as per is.2508-19846.printed bio- hazard symbol & words in single color7.leak proof & double sealing at bottom8.thickens 250 to 300gauge (62.5 to 75 microns)or as per required9. plastic thread (virgin sutli) of 1 mtr. length supply separately par kg 10. in case of order exceeds 500kg. name of hospital to be print on bag11.tensile strenth at break (min): lengthwise :mini 120kg/cm2 ,elongation at break(min) lengthwise: mini 200percent density: 0.913 to 0.923 g/ml at 27c, 1 kg., 44, biomedicalwaste plastic polymer bag red medium size: 20 x 28 inch, 1 kg., 48, biomedicalwaste plastic polymer bag black small size: 13 x 18 inch, 1 kg.
Tender For providing of hiring of creative agency - for supply of medical furniture items; refer annexure a for list of furniture items; na; na; na; na; na; na; na,hiring of creative agency - for supply of medical equipment and items; refer annexure a for technical data and list of medical equipments; na; na; na; na; na; na; na
Tender For corrigendum : supply of medical items and other items - metal detector , oxygen regulator , patient monitor , bp appt mercury , suction machine , sterilizer , pulse oximeter , ragzine
Tender For procurement of medical equipment for pt jln govt medical college chamba - cost of core equipment (digital mammography) (inr) including supply, installation and commissioning as required in the technical specification along with accessories and 3 years warranty., cost of core equipment (full room digital radiography machine) (inr) including supply, installation and commissioning as required in the technical specification along with accessories and 3 years warranty., cost of core equipment (high-resolution colour doppler ultrasound unit) (inr) including supply, installation and commissioning as required in the technical specification along with accessories and 3 years warranty., note a) the basic price of the goods to be quoted without gst.b) the cmc should be quoted year wise without gst.c) cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.d) gst shall be payable as applicable from time to time.e) charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section i (h.p) shall also be borne by the supplier.f) the price should be inclusive of supply, installation, commissioning charges.g) l-1 will be determined equipment-wise on total basic price of the equipment including accessories (excluding gst) + total cmc (excluding gst) +turnkey work (if any), excluding gst , for the items/consignee as mentioned in section-i.it is certified that the cost of goods shown above, is all inclusive except gst. signature of authorizedsignatory with seal
Tender For corrigendum : procurement of disposable and implants items for ctvs department rgssh - part-01, oxygenator membrane (adult) with hard shell reservoir:1. should have a micro porous hollow fibre membrane oxygenator2. should have open circuit configuration3. should have hard shell venous reservoir of capacity more than 4000ml. with built of cardiotomy reservoir with 30 filter capacity.4. should have blood flow range 0.5 ltr to 7 ltr/min.5. should have priming volume less than 220ml6. should have high efficiency heat exchanger.7. venous return port with rotating facility.8. should have an auto vent facility.9. port size : arterial outlet, venous outlet 3/8 venous inlet 10. should have sampling port., oxygenator membrane (semi-adult) with hard shell reservoir:1. should have a micro porous hollow fiber membrane oxygenator2. should have open circuit configuration3. should have hard shell venous reservoir of capacity more than 3000ml. with built of cardiotomy reservoir with 30 filter capacity.4. should have blood flow range 0.5 ltr to 3.5 ltr/min.5. should have priming volume less than 180ml6. should have high efficiency heat exchanger7. venous return port 3/8 with rotating facility.8. should have an auto vent facility.9. port size : arterial outlet, venous outlet 3/8 venous inlet 3/8 10. should have sampling port., oxygenator membrane (paed.) with hard shell reservoir:1. should have a microporus hollow fiber membrane oxygenator2. should have open circuit configuration3. should have hard shell venous reservoir of capacity more than 1000ml. with built of cardiotomy reservoir with 30 filter capacity.4. should have blood flow upto 2.8 ltr/min.5. should have priming volume less than 140ml6. should have high efficiency heat exchanger.7. venous return port 3/8 with rotating facility and redurs8. should have an auto vent facility.9. port size : arterial outlet 1/4 , venous inlet 3/8 with redurs, oxygenator membrane (neonatal):1. should have venous inlet .2. arterial outlet port tubing size.3. it should have least priming volume less than 70ml.4. arterial flow upto 1.2 ltr/minute.5. approximate reservoir capacity should not be 600ml.6. should have redurs.7. blood inlet and outlet port size redu able to 3/16 ., pre-connected tubing pack adult with arterial line filter:1. circuit diagram attached.2. tubing should have transparent, medical implant grade pvc of class vi usp, marked., pre-connected tubing pack paed. with arterial line filter:1. circuit diagram attached2. tubing should have transparent ,medical implant grade pvc of class vi usp, marked, pre-connected tubing pack paediatric small. with arterial line filter:1. circuit diagram attached2. tubing should have transparent ,medical implant grade pvc of class vi usp, marked, pre-connected tubing pack neonatal. with arterial line filter:1. circuit diagram attached.2. it should have a good quality arterial filter pore size should have 35-40 micron.3. tubing should have transparent medical implant grade pvc of class vi usp, marked., online blood cardioplegia delivery system:1. should have in built high efficiency heat exchanger of metallic for fast cooling & re- warming.2. should have priming volume less than 80ml.3. should have max flow rate 1 ltr/min4. should have pressure drop not more than 13mmhg 500ml/min5. should have blood to crystalloid ratio of 4:1 with bride connection facilities and interchangeable tubing ratio.6. should have auto-vent line system on accidental bock of cardioplegia deliver liner.7. pvc tubing should have medical implant grade of class vi ,usp, marked., ante- grade root cardioplegia cannula with side arm:1. should have size 12fr,14 fr. & 16 fr.2. should have regular tip stilate with side arm for vent with flange3. selection strictly on quality basis., ante- grade root cardioplegia cannula without side arm:1. should have size 12fr, 14 fr. & 16 fr.2. should have regular tip stilate with flange3. selection strictly on quality basis.4. iso certification, coro
Tender For procurement of medical items - pulse oximeter spo2 pulse rate and respiratory rate monitor with plethysmography waveform for adults children and neonates display indicates high and normal respiratory count for inputted age based off of who imci guidelines , blood glucometer who approved iso 15197 2015 iso 15197 2013 , stethoscopes littmann iii iv cardio and paidaetrics , dummy1 , dummy 2